Study of Surface Tension Properties Looked on Contact Angle Value on 100% Nylon Textile Fabric using Corona Discharge Plasma Technology

Authors

  • Valentinus Galih Vidia Putra Textile Engineering Department, Politeknik STTT Bandung, Indonesia
  • Juliany Ningsih Mohamad Physics Department, Universitas Nusa Cendana, Indonesia
  • Yusril Yusuf Physics Department, Universitas Gadjah Mada, Indonesia

DOI:

https://doi.org/10.17509/wafi.v5i1.22382

Keywords:

Plasma, tekstil, sudut kontak

Abstract

Artikel ini menjabarkan pemanfaatan aplikasi teknologi plasma pijar korona pada bidang tekstil dalam modifikasi sifat pembasahan pada permukaan kain nilon 100% ditinjau dari sifat fenomena kapilaritas. Hasil riset memperlihatkan bahwa dengan perlakuan plasma pada kain nilon 100% dengan tetal pakan dan lusi masing-masing 70 helai/inci dan 60 helai/inci didapatkan bahwa terdapat perubahan sifat hidrofilik (dapat lebih mudah menyerap) kain melalui perubahan sudut kontak pada fenomena kapilaritas untuk waktu uji sudut kontak yang sama.

References

Shishoo (2007), Plasma Technology For Textile, Woodhead Publishing, Cambridge.

Usman, A.S. (2012). Peningkatan Daya Saing Industri TPT Melalui Standarisasi, Makalah Seminar Nasional Tekstil, Bandung.

Yales, V. Kendalikan Konsumsi Energi Sektor Manufaktur. Surat Kabar KOMPAS, 18 April 2012, halaman 7

Kaiser, M., Baumgartner, K.-M., Schulz, A., Walker, M., and Rauchle, E. (1999) Linearly extended plasma source for large-scale applications. Surf. Coat. Technol., 116-119, 552–557

Sjaifudin T.A.,Widodo, M., Muhlisin, Z., Nur, M. (2014). Modifikasi Permukaan Bahan Tekstil Dengan Plasma Lucutan Korona, Prosiding Seminar Nasional Tekstil, 1-22.

Rauscher, Perucca, Buyle (2010), Plasma Technology For Hyperfunctionals Surfaces, Wiley-VCH, Weinheim.

Lawrence, C A (2003), Fundamentals of Spun Yarn Technology, CRC Press, New York

Putra VGV, Dewanto A, Totong, (2016), Predicting Non Inertia Frame Related By Speed of Bobbin Compared by Speed of Rotor, Global Journal of Pure and Applied Mathematics, Vol 12.,No.5 pp. 4107-4114.

Putra VGV, Maruto, G & Rosyid, M.F.(2017), New theoretical modeling for predicting yarn angle on OE yarn influenced by fibre movement on torus coordinate based on classical mechanics approach, Indian Journal of Fibre and Textile Research, Vol.42. pp. 359-363.

F. F. Chen, (1984), Introduction to Plasma Physics and Controlled Fusion, vol. 1, New York: Plenum Press.

Lieberman, M & Lichtenberg, (1994), Principles of Plasma Discharges and Materials Processing, New York: John Wiley and Sons.

Downloads

Published

2020-06-30

Issue

Vol. 5 No. 1 (2020): June

Section

Articles

License

Copyright (c) 2020 Wahana Fisika: Jurnal Fisika dan Terapannya

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

All published content is licensed under the Creative Commons Attribution-ShareAlike (CC BY-SA) license. This license allows others to share, copy, distribute, and adapt the work, including for commercial purposes, as long as proper credit is given to the original authors and source, and any derivative works are distributed under the same license. Copyright © Wahana Fisika, Universitas Pendidikan Indonesia

How to Cite

Putra, V. G. V., Mohamad, J. N., & Yusuf, Y. (2020). Study of Surface Tension Properties Looked on Contact Angle Value on 100% Nylon Textile Fabric using Corona Discharge Plasma Technology. Wahana Fisika: Jurnal Fisika Dan Terapannya, 5(1), 10-17. https://doi.org/10.17509/wafi.v5i1.22382